Single core cable FLRY-B 0. 75mm² grey/black thin wall on reel 100 meter

The FLRY-B wiring cable with a 0.75mm² cross-section in the grey/black colour combination, supplied on a 100-metre reel, is a thin-walled PVC-insulated automotive cable conforming to DIN ISO 6722.

The two-colour grey/black version is specifically intended for applications where rapid visual differentiation between conductors is necessary, for example in systems with multiple individual grey or black wires.

In the automotive industry, two-colour cables are used in complex wiring harnesses where each conductor must be uniquely identifiable without the use of additional labels or markings.

The 0.75mm² cross-section is suitable for currents up to approximately 6A and is widely used for sensor, control and low-power signal lines in vehicle electronics.

The conductor consists of finely stranded tinned copper wire, which is corrosion-resistant and has low conductor resistance even after prolonged exposure to moisture and temperature fluctuations.

The FLRY-B insulation carries a temperature class of -40°C to +105°C, making the cable suitable for use in cold environments as well as compartments subject to higher thermal loads.

The 100-metre reel is well suited for professional use by wiring harness manufacturers, vehicle builders and installers managing multiple colour combinations in standardised cable assemblies.